Application for Drone
SoC, ESC, battery and payload cooling for foldable, enterprise and agricultural drones.
FOLDABLE CAMERA DRONE
Exploded view · thermal path from SoC to chassis. Thermal silicone pad for SoC & ISP to heat spreader.
ENTERPRISE HEXACOPTER
Exploded view · thermal imaging payload & high-power ESC. Reinforced thermal pad for AI SoC to top plate.
AGRICULTURAL SPRAYING DRONE
Exploded view · high-current powertrain cooling. Thick thermal gap pad for ESC heatsink to frame.
VTOL FIXED-WING UAV
Exploded view · avionics bay heat management. Soft thermal pad for autopilot SoC.
Application for Smartphones and Tablets
Layer-by-layer thermal solutions from SoC shield to display, battery isolation to charging ICs.
SMARTPHONE · EXPLODED VIEW
Application map for flagship phone. Insulating film for battery-to-logic-board isolation.
TABLET · EXPLODED VIEW
Application map for large-format tablet. Graphite film for full-area sheet behind display.
Application for LED Lighting
From A60 bulbs to street lights — MCPCB, COB modules, high bays and extruded heatsinks.
LED BULB · EXPLODED VIEW
Application map for A60 LED bulb. Thermal grease for MCPCB to die-cast heatsink.
COB DOWNLIGHT · THERMAL STACK
Application map for COB module. Thermal grease for COB die to MCPCB interface.
LED HIGH BAY · EXPLODED VIEW
Application map for UFO high bay. Thermal potting gel for driver cavity heat to housing.
LED STREET LIGHT · MODULE STACK
Application map for street light. Thermal grease for LED strip to thermal pad.
Application for Power Supply
Conversion losses become heat. Our materials carry it from semiconductor junction to heatsink and air.
POWER SUPPLY THERMAL SOLUTIONS
Thermal Interface Materials
Conversion losses become heat. Thermal materials carry it from the semiconductor junction to the heatsink, the metal case and the air.
- 01 Thermal Silicone Pad – Fills uneven gaps; soft and reworkable
- 02 Insulating Sheet – Conducts heat while blocking current
- 03 Potting Compound – Encapsulates magnetics and the module
THREE JOBS: Conduct · Isolate · Protect
INSIDE A SWITCH-MODE POWER SUPPLY
Finned Aluminium Cover
- Passive heatsink and EMI shield
- Natural convection path
Power Semiconductors
- MOSFETs, bridge rectifier, PFC switch
- Highest heat flux in the unit
Steel Chassis & Baseplate
- Conduction path into the cabinet
- Grounding and mounting
Cooling Fan
- Forced convection in enclosed units
- Fanless designs use the case instead
Magnetic Components
- Main transformer and PFC choke
- Bulky, distributed heat sources
Electrolytic Capacitors
- Temperature drives service life
- Keep clear of hot spots
WHERE THERMAL MATERIALS GO
Thermal Silicone Pad
- Device to finned heatsink
- Fills uneven gaps, low pressure
- Soft, reworkable, pre-cut
Insulating Sheet
- Under TO-220 / TO-247 packages
- Heat through, current blocked
- Replaces grease and mica
Potting Compound
- Fills the magnetics cavity
- Transformer and PFC choke
- Vibration, moisture, dielectric shield
Material Key
MATERIAL SELECTION GUIDE
| Application Point | What It Must Do | Recommended Material |
|---|---|---|
| MOSFET / rectifier to heatsink | Uneven gap, low clamping force | Thermal silicone pad |
| TO-247 / IGBT, live tab | Dielectric isolation + heat transfer | Thermally insulating sheet |
| Transformer & PFC choke | Void-free fill, vibration damping | Conductive potting compound |
| PCB to aluminium enclosure | Large gap, reworkable assembly | Ultrasoft gap pad · gap filler |
| Control IC, diode, small parts | Thin bond line, fast dispensing | Thermal grease · conductive RTV |
- -40 to 105 °C cycling
- UL94 V-0 flame rating
- Dielectric withstand
- Pre-cut pads & 2K dispensing
Application for Power Adapters and Chargers
Wall chargers, laptop adapters, wireless charging pads — full-fill potting and thin bond-line solutions.
GAN WALL CHARGER · EXPLODED VIEW
LAPTOP ADAPTER · EXPLODED VIEW
WIRELESS CHARGER · EXPLODED VIEW
Not sure which material fits your heat path?
Send the heat load, gap and environmental class — our application engineers will recommend the material and format for that position.