MIWAKEE launches high-conductivity TIM line for AI accelerators
- New 10–15 W/m·K silicone pad family targets AI GPU accelerators
- Low-CTE formulation accommodates tall tolerance stack-ups
- UL94 V-0 rated, RoHS and REACH compliant
Data center GPU accelerators now routinely exceed 700 W per board, pushing thermal interface material (TIM) requirements well beyond the 5–8 W/m·K range that served the last decade of server CPU design. MIWAKEE has responded with a new high-conductivity silicone pad family spanning 10, 12 and 15 W/m·K, purpose-built for the thermal demands of AI accelerators.
Why 15 W/m·K is the new baseline
At the junction-to-case level of a modern AI accelerator, a 1 °C reduction in die temperature can extend device lifetime by several months under continuous load. Our engineering team found that the 15 W/m·K grade, when paired with a low-CTE formulation and a 0.3 mm bond line, delivers a 4–6 °C drop versus the 8 W/m·K grade that was common in 2023–24 GPU reference designs.
The new line is available in two CTE options: a standard formulation (250 ppm/°C) for general high-power modules, and a low-CTE variant (80 ppm/°C) for stack-ups where thermal expansion mismatch between silicon, substrate and heatsink creates a risk of pad extrusion over time.
| Grade | Thermal conductivity (W/m·K) | Thickness range (mm) | Max operating temp | CTE (ppm/°C) |
|---|---|---|---|---|
| 15 W | 15.0 | 0.3 – 5.0 | 200 °C | 250 / 80 |
| 12 W | 12.0 | 0.5 – 10.0 | 200 °C | 250 |
| 10 W | 10.0 | 0.5 – 10.0 | 200 °C | 250 |
What this means for your design
For AI accelerator board designers evaluating the new family, we recommend starting with a 0.3–0.5 mm 15 W/m·K grade in the primary die-to-heatsink interface, then stepping down to 10 or 12 W/m·K for secondary interfaces where the thermal budget is less critical. Our application engineers can model your specific stack-up and recommend the optimal grade and bond-line thickness.
Samples of the new line are available through the Request a Sample page. We expect first mass-production shipments to begin in Q1 2027.